FoundryGeneral® Foundry Adhesive 300 is a ready to use hot shell core and mold paste. FoundryGeneral® Foundry Adhesive 300 is a slower version than the 100 through 250 series with a longer open time for very hot shells or in applications where prolonged open times before shells are closed is required. FoundryGeneral® Foundry Adhesive 300 also tends to hold a better bead than the 100 through 250 series.
Appearance: Thick, yellow to orange paste
Viscosity: 21,000 cps
Flash Point: 428°F
Density: 8.3 lbs/gal
VOC: Not determine
FoundryGeneral® Foundry Adhesive 300 may have a slight separation when received. Mechanical agitation is required to thoroughly remix the paste to a uniform consistency. Five minutes when first put into service and one minute at the start of each shift is recommended. Application of FoundryGeneral® Foundry Adhesive 300 can be done through a normal foundry type paste bulb or by liquid paste pump. Another application includes dispensing the liquid from the liquid applicator by a wiper blade traveling over a perforated template. FoundryGeneral® Foundry Adhesive 300 can also be accurately printed onto the shell by an appropriately contoured fixture with or without a vibrator. Please refer to the MSDS for proper safety instructions.
Ready to use
Low smoke evolution
Extra strong bond
Reduces metal run out during pouring shells
Avoid heat, sparks and open flames. Avoid strong oxidizing agents (i.e. bleach).
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste SHIPPING:
FoundryGeneral® Foundry Adhesive 300 is shipped in plastic pails and metal drums.
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification