Foundry Metal Cleaners
Foundry Metal Cleaners

Introduction: Green Sand Parting Compounds For Green Sand Casting Foundry

Green Sand Parting molds are made with a moist sand, in which the moisture is present at the time metal is poured into the mold. Green sand molds are used more extensively than any other mold material and may be used for making small, medium, and large castings. These molds are relatively inexpensive to produce, since the basic material is readily available.

Description: Simple, even some complex, changes may be made in the pattern design, and thus in the mold design, at very little cost. Green sand is adapted easily and quickly to mechanical and automated production methods.

As such, it is important that the dimensions of the Green Sand mold be precise. Our Green Sand Parting Compounds allow for excellent release of Green Sand molds from patterns while keeping their structural integrity.

Green Sand Partings

PRODUCT
 
INDUSTRY
   
CARRIER
   
PHYSICAL PROPERTIES
   
DESCRIPTION
Sand Casting
Investment Casting
Lost Foam Casting
Water
Oil
Solvent
Flash Point (F°)
VOC (lbs/gal)
Wt/Gal (lbs/gal)
PH
Sand Treatment
FoundryGeneral® Sand Treatment 16-250
checkmark
checkmark
126
ND
6.88
NA
Lubricant and release for green sand
Pattern Sprays/Green Sand Partings
FoundryGeneral® Pattern Spray 1
checkmark
checkmark
270
3.05
7.05
NA
Economical, oil and fatty acid based
FoundryGeneral® Pattern Spray WEB
checkmark
checkmark
NA
3.1
7.7
8
Low VOC, nonflammable
FoundryGeneral® Green Sand Parting 101
checkmark
checkmark
270
ND
7.1
NA
Excellent for auto. molding machines
FoundryGeneral® Green Sand Parting 102
checkmark
checkmark
265
ND
7
NA
Low viscosity, for automatic machines
FoundryGeneral® Green Sand Parting 103
checkmark
checkmark
145
ND
7.15
NA
Economical, for automatic machines
FoundryGeneral® Green Sand Parting 104
checkmark
checkmark
285
ND
7.25
NA
Highly concentrated
FoundryGeneral® Green Sand Parting 105
checkmark
checkmark
250
ND
7
NA
Contains no solvent
FoundryGeneral® Mold Release 007H
checkmark
checkmark
0
ND
5.6
NA
Aerosol
FoundryGeneral® Mold Release 168
checkmark
checkmark
105
5.75
6.55
NA
Multiple releases