• 12336 Emerson Dr, Brighton, MI 48116

INTRODUCTION: FOUNDRY CORROSION INHIBITORS, FOUNDRY RUST INHIBITORS, FOUNDRY CORROSION PROTECTION

When working with ferrous metals, flash rusting is always an issue. High humidity in foundries can result in flash rusting which is why Foundry Corrosion Inhibitors are required. As with many applications, aqueous systems have been preferred for both health and safety reasons.

Description: Our water based Foundry Corrosion Inhibitors provide ferrous corrosion inhibition, exceptionally good wetting and hard water compatibility.

These products are offered in both concentrated and ready-to-use versions, offering both humidity cabinet and Cast Iron Chip Test (IP287) protection.

Our Foundry Corrosion Inhibitors have found utility in both spray and dip tank applications with excellent results for both short term and long term storage.

Corrosion Inhibitors

PRODUCT
 
INDUSTRY
   
CARRIER
   
PHYSICAL PROPERTIES
   
DESCRIPTION
Sand Casting
Investment Casting
Lost Foam Casting
Water
Oil
Solvent
Flash Point (F°)
VOC (lbs/gal)
Wt/Gal (lbs/gal)
PH

FoundryGeneral® Rust Inhibitor 2999
checkmark
checkmark
checkmark
checkmark
NA
0.6
8.4
8.2
Ready to use, prevents flash rusting

FoundryGeneral® Rust Inhibitor 4288
checkmark
checkmark
checkmark
checkmark
NA
0.25
8.8
8.4
Concentrate, prevents flash rusting

FoundryGeneral® Green Core Paste Thick
checkmark
checkmark
0
0
12
NA
Thicker version of QUIKDRY